Product Description
Neutral mold release agent is refined by selecting special grade silicone oil and special additives.
?
Recommended Applications
It is suitable for the demolding of various types of plastic materials such as ABS, PC, PE, PS, PP, PVC, NYLON, ACRYLICS, SAN, etc. It is especially suitable for the processing that requires better surface effect of the workpiece and more demolding times.
?
Instructions?
● Before spraying the release agent, the surface of the object to be sprayed is usually cleaned with a cleaning agent and dried. After cleaning, it can be blown dry with filtered dry compressed air, or dried with a dryer at 120-170 ℃.
● Before use, please shake the can upside down and shake the product to make the spray more uniform.
● When spraying, press the spray head so that the nozzle is vertically sprayed about 15-30cm away from the object (the distance and spray volume can be adjusted according to the actual situation of the workpiece and spray area).
?
Product advantages
● Demolding times is good, and the surface effect of the demolded parts is good.
● It has good anti-rust and anti-corrosion performance, and will not corrode the mold.
● Mild odor, non-toxic, does not affect the operator's health.
● Good compatibility with most plastics.
● Good safety performance, deformation and burst pressure of spray can are higher than national standards.
● The manufacturer passed the SGS IECQ HSPM QC080000 Environmental Hazardous Substance Process Management System certification, which can effectively ensure that the products comply with the EU RoHS environmental protection directives and PAHS, PFOS testing from beginning to end.
?
Product?Storage
● All canned products are flammable, and the storage temperature should be below 50 ℃.
● For long-term storage, the stack height of cartons should not exceed 8 cartons.
● Handle the product with care, and do not use dangerous actions such as dropping, throwing, or bumping.
● The storage place should be ventilated, dry and cool. Direct sunlight or outdoor exposure is strictly prohibited.
● Do not knock and keep away from fire.
● Do not put it upside down.
?
?
Typical data
|
Test Items |
Test Method |
Unit |
Test result |
|
Color |
Visual inspection |
/ |
Transparent water white |
|
Odor |
/ |
/ |
Tasteless |
|
Desity@15℃ |
ASTM D1298 |
g∕ml |
0.69 |
|
Kinematic viscosity(40℃) |
ASTM D445 |
cSt |
85 |
|
Copper corrosion |
ASTM D130 |
/ |
1a |
|
Internal pressure |
GB/T14449 |
MPa |
≤0.8 |
|
Ejection rate |
GB/T14449 |
% |
≥98 |
The above is typical data and does not represent product specifications. With the continuous updating of additives and the continuous emergence of new products, the above information may be changed at any time without notice. This data is for reference only.
